Internal IDE/ATAPI interface, stores 80GB (uncompressed) and up to 208GB (compressed - depending on file types), 6MB/s transfer rate.

Apart from AIT-2 Turbo media, this drive is also fully backwards compatible (read and write) to AIT-1 Turbo, AIT-E Turbo, AIT-2, and AIT-1 media.

This unit ships as a bare drive (no accessories). For the accessorised version, please see AITI200A in the Kitted Drives section.


Compatibility
Formats Supported: AIT-1 TURBO, AIT-E TURBO, AIT-1
Media Supported: 8mm 230m (with or without MIC)

Performance
Native Capacity: 80GB
Native Storage Speed: 12MB/S
Compression: ALDC (Hardware)
Interface Speed: Burst Transfer Rate 100MB/s ATA/ATAPI-6 Ultra DMA mode5 (Ultra ATA/100)
Buffer: 32MB Buffer
Average Access: 43s (AIT-2 TURBO MIC Tape), 48s (AIT-2 TURBO Non-MIC Tape)

Reliability
Writing Method: Helical Scan
MTBF: 300,000POH @ 100% Duty Cycle
Warranty: 3yrs Replacement Warranty

Environment
Operating Temp: 5ºC to 40ºC
Storage Temp: -40ºC to 70ºC
Operating Humidity: 20% to 80% (non condensing)

Connection
Interface: ATA/ATAPI-6 Ultra DMA mode 5
Socket: Internal Ultra DMA 40pin Female
Voltage: DC 5V 1.6A (1.9A max), DC12V 0.5A (1.2A max

Physical
Power: 12W operating
Dimensions: With 5.25" side rails: 146 (W) x 41.2 (H) x 155 (D) mm
Dimensions: Without 5.25" side rails: 101.6 (W) x 41.2 (H) x 155 (D) mm
Weight: With 5.25" side rails: 1.05g
Weight: Without 5.25" side rails: 780g